日本語
English
KV/KV-X CR, CM and variable cross-reference
A list of the correspondence of control relays (CR), control memory (CM) and variable names between the KEYENCE KV-8000 series and the KV-X500/X300 series.
CR: control relays
| Device comment | KV-8000 Series | KV-X500/X300 series | Remarks | |
|---|---|---|---|---|
| Devices | Devices | Variable name | ||
| Logging/trace 0 execute enable | CR0000 | CM1600.0 | _LoggingTrace[0].ExecEnable | |
| Logging/trace 0 in progress | CR0001 | CM1600.1 | _LoggingTrace[0].InOperation | |
| Logging/trace 0 file write finished | CR0002 | CM1600.2 | _LoggingTrace[0].FileWriteEnd | |
| Logging 0 buffer below 50% warning | CR0003 | CM1600.3 | _LoggingTrace[0].BufferHalfAlm | |
| Logging 0 buffer overflow | CR0004 | CM1600.4 | _LoggingTrace[0].BufferOverflow | |
| Logging 0 written during RUN while executing | CR0005 | CM1600.5 | _LoggingTrace[0].WriteDuringRun | |
| Logging/trace 0 logging/trace error | CR0008 | CM1600.8 | _LoggingTrace[0].LoggingTraceError | |
| Logging/trace 0 insufficient memory error | CR0009 | CM1600.9 | _LoggingTrace[0].NoMemoryCapacity | |
| Logging/trace 0 device/trigger setting error | CR0010 | CM1600.10 | _LoggingTrace[0].DeviceTriggerSetError | |
| Trace 0 file save trigger monitor | CR0011 | CM1600.11 | _LoggingTrace[0].FileSaveTriggerMonitor | |
| Trace 0 data acquisition complete | CR0012 | CM1600.12 | _LoggingTrace[0].DataAcquireComplete | |
| Logging/trace (ID1 to ID9) | CR0100-0915 | CM1610.0 | _LoggingTrace[1].ExecEnable | |
| Always ON | CR2002 | CR2002 | _AlwaysOn | |
| Always OFF | CR2003 | CR2003 | _AlwaysOff | |
| 10 ms clock pulse (50% duty) | CR2004 | CR2004 | _Clock10ms | |
| 100 ms clock pulse (50% duty) | CR2005 | CR2005 | _Clock100ms | |
| 1 s clock pulse (50% duty) | CR2006 | CR2006 | _Clock1s | |
| OFF for 1 scan only at start of operation | CR2007 | CR2007 | _FirstScanOff | |
| ON for 1 scan only at start of operation | CR2008 | CR2008 | _FirstScanOn | |
| ON when the result is negative or overflows | CR2009 | No function | ||
| ON when the result is zero | CR2010 | No function | ||
| ON when the result is positive | CR2011 | No function | ||
| ON when an instruction execution error occurs | CR2012 | No function | ||
| Constant scan time operation | CR2303 | CM1024.3 | _ProgramInfo.FixScanTimeEnable | |
| Scan time setting exceeded | CR2304 | CM1024.4 | _ProgramInfo.FixTimeExcess | |
| Backup battery error | CR2306 | CM1024.6 | _ProgramInfo.BackupBattError | |
| Clear min/max scan time | CR2307 | CM1024.7 | _ProgramInfo.ScanTimeMaxMinClear | |
| END processing time setting | CR2308 | CM1024.8 | _ProgramInfo.FixEndProcTimeEnable | |
| RTC low voltage error | CR2311 | CM1024.11 | _ProgramInfo.TimeError | |
| Project password authentication prohibited | CR2314 | CM1024.14 | _ProgramInfo.ProjectPasswordAuthDisabled | |
| ASCII conversion zero suppression setting | CR2814 | No function | ||
| ASCII conversion omit + sign | CR2815 | No function | ||
| Inter-unit synchronization refresh time exceeded | CR3100 | CM2410.0 | _UnitSynchronize.RefreshIntervalOver | |
| CPU memory save request | CR3200 | CM1860.0 | _Storage.CpuMemorySave.Request | |
| CPU memory saving | CR3201 | CM1860.1 | _Storage.CpuMemorySave.Busy | |
| CPU memory save complete | CR3202 | CM1860.2 | _Storage.CpuMemorySave.Complete | |
| CPU memory save error | CR3203 | CM1860.3 | _Storage.CpuMemorySave.Error | |
| CPU memory instruction RAM mode | CR3207 | CM1861.7 | _Storage.StorageFBIsRAMMode | |
| Arbitrary logging/trace in progress | CR3210 | CM1861.10 | _Storage.LoggingTraceBusy | |
| Storage instruction executing | CR3214 | No function | ||
| Alarm relays | CR3300-CR3415 | No function | ||
| Alarm detected | CR3500 | No function | ||
| Alarm history setting | CR3501 | No function | ||
| Alarm history clear | CR3502 | No function | ||
| Logging internal buffer overflow | CR3513 | CM1861.11 | _Storage.LoggingInternalBufferOverflow | |
| HKEY instruction multiple keys prohibited | CR3514 | No function | ||
| HKEY instruction scan finished | CR3515 | No function | ||
| HKEY instruction information storage area | CR3600-CR3615 | No function | ||
| Clear major error history on OFF→ON | CR3900 | |||
| Clear minor error history on OFF→ON | CR3901 | |||
| Major error history at maximum number of entries | CR3902 | No function | ||
| Minor error history at maximum number of entries | CR3903 | No function | ||
| RUN/PRG switch status (ON: RUN side / OFF: PRG side) | CR3904 | |||
| Major error occurring | CR3905 | CM1050.5 | _ErrorCtrl.Error | |
| Minor error occurring | CR3906 | CM1050.6 | _ErrorCtrl.Warning | |
| Clear current error | CR3909 | CM1050.9 | _ErrorCtrl.ClearCurrentError | |
| Clear all error and event history | CR3910 | CM1050.10 | _ErrorCtrl.ClearHistory | |
| Expansion unit present (expansion units 1 to 48) | CR4001-CR4300 | CM2000.1 | _ExpansionUnit.Connected[1] | |
| AW Up key pressed | CR4400 | CM1720.0 | _AccessWindow.UpKeyPressed | |
| AW Down key pressed | CR4401 | CM1720.1 | _AccessWindow.DownKeyPressed | |
| AW Left key pressed | CR4402 | CM1720.2 | _AccessWindow.LeftKeyPressed | |
| AW Right key pressed | CR4403 | CM1720.3 | _AccessWindow.RightKeyPressed | |
| AW MENU key pressed | CR4404 | CM1720.4 | _AccessWindow.MenuKeyPressed | |
| AW ENT key pressed | CR4405 | CM1720.5 | _AccessWindow.EnterKeyPressed | |
| AW user message displayed | CR4415 | CM1720.15 | _AccessWindow.UserMessageDisplayed | |
| AW line 1 blink | CR4500 | CM1721.0 | _AccessWindow.BlinkLine[1] | |
| AW line 2 blink | CR4501 | CM1721.1 | _AccessWindow.BlinkLine[2] | |
| AW line 3 blink | CR4502 | CM1721.2 | _AccessWindow.BlinkLine[3] | |
| AW line 4 blink | CR4503 | CM1721.3 | _AccessWindow.BlinkLine[4] | |
| AW user messages 1 to 63 | CR4601-CR4915 | CM1722.1 | _AccessWindow.DisplayUserMessage[1] | |
| Memory card mount request | CR5400 | CM1800.0 | _Storage.MemCardMountReq | |
| Memory card unmount request | CR5401 | CM1800.1 | _Storage.MemCardUnmountReq | |
| Memory card in use | CR5402 | CM1800.2 | _Storage.MemCardInUse | |
| Memory card recognition complete | CR5403 | CM1800.3 | _Storage.MemCardRecognized | |
| Memory card present | CR5404 | CM1800.4 | _Storage.MemCardExist | |
| Memory card write protect | CR5405 | No function | ||
| CPU memory mount request | CR5408 | CM1800.8 | _Storage.CpuMemoryMountReq | |
| CPU memory unmount request | CR5409 | CM1800.9 | _Storage.CpuMemoryUnmountReq | |
| CPU memory in use | CR5410 | CM1800.10 | _Storage.CpuMemoryInUse | |
| CPU memory recognition complete | CR5411 | CM1800.11 | _Storage.CpuMemoryRecognized | |
| Project load execute request | CR5500 | CM1830.0 | _Storage.ProjectLoad.Request | |
| Project save execute request | CR5502 | CM1820.0 | _Storage.ProjectSave.Request | |
| Project load complete | CR5504 | CM1830.2 | _Storage.ProjectLoad.Complete | |
| Project load failed | CR5505 | CM1830.3 | _Storage.ProjectLoad.Error | |
| Project save complete | CR5506 | CM1820.2 | _Storage.ProjectSave.Complete | |
| Project save failed | CR5507 | CM1820.3 | _Storage.ProjectSave.Error | |
| Recipe load execute request | CR5508 | CM1850.0 | _Storage.RecipeLoad.Request | |
| Recipe load complete | CR5510 | CM1850.2 | _Storage.RecipeLoad.Complete | |
| Recipe load failed | CR5511 | CM1850.3 | _Storage.RecipeLoad.Error | |
| Recipe save execute request | CR5512 | CM1840.0 | _Storage.RecipeSave.Request | |
| Recipe save complete | CR5514 | CM1840.2 | _Storage.RecipeSave.Complete | |
| Recipe save failed | CR5515 | CM1840.3 | _Storage.RecipeSave.Error | |
| Operation recording 0 save request | CR5600 | CM6000.0 | _OperationRecorder[0].SaveRequest | |
| Operation recording 0 in progress | CR5601 | CM6000.1 | _OperationRecorder[0].InAction | |
| Operation recording 0 save trigger monitor | CR5602 | CM6000.2 | _OperationRecorder[0].SaveTriggerMonitor | |
| Operation recording 0 saving | CR5603 | CM6000.3 | _OperationRecorder[0].SaveBusy | |
| Operation recording 0 collecting | CR5604 | CM6000.4 | _OperationRecorder[0].Collecting | |
| Operation recording 0 setting error | CR5605 | CM6000.5 | _OperationRecorder[0].SettingError | |
| Operation recording 0 save complete | CR5607 | CM6000.7 | _OperationRecorder[0].SaveComplete | |
| Operation recording 0 save error | CR5608 | CM6000.8 | _OperationRecorder[0].SaveError | |
| Device recording 0 insufficient buffer | CR5609 | CM6000.9 | _OperationRecorder[0].BufferShortage | |
| Operation recording 0 save entire buffer mode | CR5614 | CM6000.14 | _OperationRecorder[0].BufferAllSaveMode | |
| Operation recording 1 save request | CR5700 | CM6200.0 | _OperationRecorder[1].SaveRequest | |
| Operation recording 1 in progress | CR5701 | CM6200.1 | _OperationRecorder[1].InAction | |
| Operation recording 1 save trigger monitor | CR5702 | CM6200.2 | _OperationRecorder[1].SaveTriggerMonitor | |
| Operation recording 1 saving | CR5703 | CM6200.3 | _OperationRecorder[1].SaveBusy | |
| Operation recording 1 collecting | CR5704 | CM6200.4 | _OperationRecorder[1].Collecting | |
| Operation recording 1 setting error | CR5705 | CM6200.5 | _OperationRecorder[1].SettingError | |
| Operation recording 1 save complete | CR5707 | CM6200.7 | _OperationRecorder[1].SaveComplete | |
| Operation recording 1 save error | CR5708 | CM6200.8 | _OperationRecorder[1].SaveError | |
| Device recording 1 insufficient buffer | CR5709 | CM6200.9 | _OperationRecorder[1].BufferShortage | |
| Operation recording 1 save entire buffer mode | CR5714 | CM6200.14 | _OperationRecorder[1].BufferAllSaveMode | |
| Operation recording (ID1 to 3) | CR5800-CR5915 | CM6400.0 | _OperationRecorder[2].SaveRequest | |
CM: control memory
| Device comment | KV-8000 Series | KV-X500/X300 series | Remarks | |
|---|---|---|---|---|
| Devices | Devices | Variable name | ||
| Read from RTC (year) | CM700 | CM700 | _CurrentDateTime[0] | |
| Read from RTC (month) | CM701 | CM701 | _CurrentDateTime[1] | |
| Read from RTC (day) | CM702 | CM702 | _CurrentDateTime[2] | |
| Read from RTC (hour) | CM703 | CM703 | _CurrentDateTime[3] | |
| Read from RTC (minute) | CM704 | CM704 | _CurrentDateTime[4] | |
| Read from RTC (second) | CM705 | CM705 | _CurrentDateTime[5] | |
| Read from RTC (day of week) | CM706 | CM706 | _DayOfWeek | |
| ﾌｧｲﾙﾚｼﾞｽﾀｶﾚﾝﾄﾊﾞﾝｸ | CM0710 | No function | ||
| Operation error details | CM0712 | CM1023 | _ProgramInfo.ProgramErrorDetail | |
| CPU function version | CM0900 | CM1788 | _ProjectInfo.CpuFuncVersion | |
| Project version | CM0907 | CM1795 | _ProjectInfo.ProjectVersion | |
| Measured scan time (1 μs) | CM1000 | CM1000 | _ProgramInfo.ScanTime | |
| Measured END processing time (1 μs units) | CM1002 | CM1002 | _ProgramInfo.EndProcTime | |
| Minimum scan time (1 μs units) | CM1004 | CM1004 | _ProgramInfo.MinScanTime | |
| Maximum scan time (1 μs units) | CM1006 | CM1006 | _ProgramInfo.MaxScanTime | |
| Set value for constant scan time operation (1 μs units) | CM1008 | CM1008 | _ProgramInfo.FixScanTimeSet | |
| END processing time setting (1 μs units) | CM1010 | CM1010 | _ProgramInfo.EndProcTimeSet | |
| Scan time when the setting is exceeded (1 μs units) | CM1012 | CM1012 | _ProgramInfo.ExcessConstantScanTime | |
| END processing time overrun value (1 μs units) | CM1014 | CM1014 | _ProgramInfo.ExecssEndProcTime | |
| 1 ms free-running counter | CM1030 | CM1030 | _FreeRunCounter1ms | |
| 10 μs free-running counter | CM1032 | CM1032 | _FreeRunCounter10us | |
| 1 μs free-running counter | CM1034 | CM1034 | _FreeRunCounter1us | |
| 0.1 μs free-running counter | CM1036 | CM1036 | _FreeRunCounter100ns | |
| Logging/trace (ID0 to ID9) file save counter | CM1500-CM1509 | |||
| Logging/trace 0-9 minimum free buffer space | CM1630-CM1639 | CM1601 | _LoggingTrace[n].MinBufferSpace | CM1601+10×n |
| Number of sensor setting instructions executed | CM1650 | CM1784 | _Project.Info.SensorInstExecCount | |
| Consecutive project password authentication failures | CM1658 | CM1785 | _Project.Info.PrjPasswordCertFailCount | |
| Cumulative project password authentication failures | CM1659 | CM1786 | _Project.Info.PrjPasswordCertFailTotal | |
| Logging/trace: free ring buffer space (ID0 to ID9) | CM1660-CM1669 | CM1602 | _LoggingTrace[n].LoopBufferSpace | CM1602+10×n |
| Logging/trace: file save counter (ID0 to ID9) | CM1680-CM1689 | CM1603 | _LoggingTrace[0].FileSavingCounter | CM1603+10×n |
| Digital trimmer 0-7 upper limit (32-bit) | CM1700-CM1715 | No function | ||
| AW user message display number | CM1720 | CM1730 | _AccessWindow.UserMessageDisplayID | |
| AW initial display language setting | CM1736 | CM1731 | _AccessWindow.InitialDispLangSetting | |
| AW initial display comment number | CM1737 | CM1732 | _AccessWindow.InitialCommentNumberSetting | |
| AW operation prohibit setting | CM1738 | CM1733 | _AccessWindow.WindowOperationDisable | |
| Ladder project name (max. 32 characters + terminator) | CM1740-CM1772 | CM1750-CM1783 | _ProjectInfo.ProjectName | STRING[64] |
| AW initial screen setting enabled | CM1780 | CM1734 | _AccessWindow.InitScreenSetValid | |
| AW initial screen setting: device type | CM1781 | CM1735 | _AccessWindow.InitScreenSetDeviceType | |
| AW initial screen setting screen ID | CM1782 | CM1736 | _AccessWindow.InitScreenSetScreenID | |
| AW initial screen setting: device number | CM1784 | CM1738 | _AccessWindow.InitScreenSetDeviceNumber | |
| AW initial screen setting display format | CM1786 | CM1740 | _AccessWindow.InitScreenSetDisplayFormat | |
| AW initial screen setting: device name notation | CM1787 | CM1741 | _AccessWindow.InitScreenSetDeviceDisplay | |
| AW initial screen setting: key lock status | CM1788 | CM1742 | _AccessWindow.InitScreenSetKeyLockStatus | |
| Auto load folder number (request) | CM1790 | CM1804 | _Storage.AutoLoad.FolderNumber | |
| Auto load completion code | CM1791 | CM1807 | _Storage.AutoLoad.FinCode | |
| Auto load folder number (complete) | CM1792 | CM1806 | _Storage.AutoLoad.CompleteFolderNumber | |
| Run load folder number (request) | CM1794 | CM1811 | _Storage.RunLoad.FolderNumber | |
| Run load completion code | CM1795 | CM1814 | _Storage.RunLoad.FinCode | |
| Run load folder number (complete) | CM1796 | CM1813 | _Storage.RunLoad.CompleteFolderNumber | |
| Number of connected expansion units | CM1869 | CM2075 | _ExpansionUnit.UnitNumber | |
| Recipe load drive number | CM1870 | CM1851 | _Storage.RecipeLoad.DriveNumber | |
| Recipe load folder number | CM1871 | CM1852 | _Storage.RecipeLoad.FolderNumber | |
| Recipe save completion code | CM1873 | CM1855 | _Storage.RecipeLoad.FinCode | |
| Recipe load drive number | CM1875 | CM1841 | _Storage.RecipeSave.DriveNumber | |
| Recipe save completion code | CM1878 | CM1845 | _Storage.RecipeSave.FinCode | |
| Drive number for project load (request) | CM1880 | CM1831 | _Storage.ProjectLoad.DriveNumber | |
| Folder number for project load (request) | CM1881 | CM1832 | _Storage.ProjectLoad.FolderNumber | |
| Drive number for project load (complete) | CM1882 | CM1833 | _Storage.ProjectLoad.CompleteDriveNumber | |
| Folder number for project load (complete) | CM1883 | CM1834 | _Storage.ProjectLoad.CompleteFolderNumber | |
| Project load completion code | CM1884 | CM1835 | _Storage.ProjectLoad.FinCode | |
| Drive number for project save (request) | CM1888 | CM1821 | _Storage.ProjectSave.DriveNumber | |
| Folder number for project save (request) | CM1889 | CM1822 | _Storage.ProjectSave.FolderNumber | |
| Drive number for project save (complete) | CM1890 | CM1823 | _Storage.ProjectSave.CompleteDriveNumber | |
| Folder number for project save (complete) | CM1891 | CM1824 | _Storage.ProjectSave.CompleteFolderNumber | |
| Project save completion code | CM1892 | CM1825 | _Storage.ProjectSave.FinCode | |
| Device recording 0 average sampling period | CM2000 | CM6002 | _OperationRecorder[0].AverageSamplingPeriod | |
| Device recording 0 average number of changed devices | CM2002 | CM6004 | _OperationRecorder[0].AverageChangedDeviceNum | |
| Device recording 0 maximum collection period | CM2004 | CM6006 | _OperationRecorder[0].MaxCollectingPeriod | |
| Device recording 1 average sampling period | CM2010 | CM6202 | _OperationRecorder[1].AverageSamplingPeriod | |
| Device recording 1 average number of changed devices | CM2012 | CM6204 | _OperationRecorder[1].AverageChangedDeviceNum | |
| Device recording 1 maximum collection period | CM2014 | CM6206 | _OperationRecorder[1].MaxCollectingPeriod | |
| Device recording 2 average sampling period | CM2020 | CM6402 | _OperationRecorder[2].AverageSamplingPeriod | |
| Device recording 2 average number of changed devices | CM2022 | CM6404 | _OperationRecorder[2].AverageChangedDeviceNum | |
| Device recording 2 maximum collection period | CM2024 | CM6406 | _OperationRecorder[2].MaxCollectingPeriod | |
| Device recording 3 average sampling period | CM2030 | CM6602 | _OperationRecorder[3].AverageSamplingPeriod | |
| Device recording 3 average number of changed devices | CM2032 | CM6604 | _OperationRecorder[3].AverageChangedDeviceNum | |
| Device recording 3 maximum collection period | CM2034 | CM6606 | _OperationRecorder[3].MaxCollectingPeriod | |
| Error code for storage instructions | CM2390 | No function | ||
| Power OFF during storage access | CM2391 | CM1870 | _Storage.PowerOffDuringStorageAccess | |
| Memory card retry count | CM2392 | CM1871 | _Storage.MemoryCardRetryCount | |
| Memory card verify error count | CM2393 | No function | ||
| Memory card timeout count | CM2394 | No function | ||
| Reset delay time on memory card error | CM2395 | CM1874 | _Storage.MemoryCardResetDelay | |
| Inter-unit synchronization refresh start time (0.1 μs) | CM2400 | CM2400 | _UnitSynchronize.RefreshStartTimeDelay | |
| Inter-unit synchronization refresh end time (0.1 μs) | CM2402 | CM2402 | _UnitSynchronize.RefreshFinishTimeDelay | |
| Inter-unit synchronization maximum refresh start time (0.1 μs) | CM2404 | CM2404 | _UnitSynchronize.RefreshStartTimeMaxDelay | |
| Inter-unit synchronization maximum refresh start time (0.1 μs) | CM2406 | CM2406 | _UnitSynchronize.RefreshFinishTimeMaxDelay | |
| Inter-unit synchronization refresh execution time (0.1 μs) | CM2408 | CM2408 | _UnitSynchronize.RefreshExecutionTime | |
| Latest major error details: year/month | CM5100 | CM5100 | _NewestError.YearMonth | |
| Latest major error details: day | CM5101 | CM5101 | _NewestError.Day | |
| Latest major error details: hour | CM5102 | CM5102 | _NewestError.Hour | |
| Latest major error details: minute | CM5103 | CM5103 | _NewestError.minite | |
| Latest major error details: second | CM5104 | CM5104 | _NewestError.Second | |
| Latest major error details: error number | CM5105 | CM5105 | _NewestError.ErrorNumber | |
| Latest major error details: number of valid data | CM5106 | CM5106 | _NewestError.ValidCount | |
| Latest major error details: detail information 01-20 | CM5107-CM5126 | CM5107-CM5126 | _NewestError.Detail[n] | |
| Latest minor error details: year/month | CM5150 | _NewestWarning.YearMonth | ||
| Latest minor error details: day | CM5151 | _NewestWarning.Day | ||
| Latest minor error details: hour | CM5152 | _NewestWarning.Hour | ||
| Latest minor error details: minute | CM5153 | _NewestWarning.minite | ||
| Latest minor error details: second | CM5154 | _NewestWarning.Second | ||
| Latest minor error details: error number | CM5155 | _NewestWarning.WarningNumber | ||
| Latest minor error details: number of valid data | CM5156 | _NewestWarning.ValidCount | ||
| Latest minor error details: detail information 01-20 | CM5157-CM5176 | _NewestWarning.Detail[n] | ||
| CPU memory usage (32-bit, bytes) | CM5872 | CM1880 | _Storage | |
| Operation recording 0 save completion code | CM6000 | CM6020 | _OperationRecorder[0].SaveFinCode | |
| Operation recording 0 save counter | CM6002 | CM6022 | _OperationRecorder[0].SaveCounter | |
| Operation recording 0: save progress detail 1 | CM6004 | CM6024 | _OperationRecorder[0].SaveProgressInfo1 | |
| Operation recording 0: save progress detail 2 | CM6005 | CM6025 | _OperationRecorder[0].SaveProgressInfo2 | |
| Operation recording 0: save progress | CM6006 | CM6026 | _OperationRecorder[0].SaveProgress | |
| Operation recording 0 save path | CM6010-CM6171 | CM6030 | _OperationRecorder[0].SavePath | |
| Operation recording 1 save completion code | CM6200 | CM6220 | _OperationRecorder[1].SaveFinCode | |
| Operation recording 1 save counter | CM6202 | CM6222 | _OperationRecorder[1].SaveCounter | |
| Operation recording 1 save progress detail 1 | CM6204 | CM6224 | _OperationRecorder[1].SaveProgressInfo1 | |
| Operation recording 1 save progress detail 2 | CM6205 | CM6225 | _OperationRecorder[1].SaveProgressInfo2 | |
| Operation recording 1 save progress | CM6206 | CM6226 | _OperationRecorder[1].SaveProgress | |
| Operation recording 1 save path | CM6210-CM6371 | CM6230 | _OperationRecorder[1].SavePath | |
| Operation recording 2 save completion code | CM6400 | CM6420 | _OperationRecorder[2].SaveFinCode | |
| Operation recording 2 save counter | CM6402 | CM6422 | _OperationRecorder[2].SaveCounter | |
| Operation recording 2 save progress detail 1 | CM6404 | CM6424 | _OperationRecorder[2].SaveProgressInfo2 | |
| Operation recording 2 save progress detail 2 | CM6405 | CM6425 | _OperationRecorder[2].SaveProgressInfo2 | |
| Operation recording 2 save progress | CM6406 | CM6426 | _OperationRecorder[2].SaveProgress | |
| Operation recording 2 save path | CM6410-CM6571 | CM6430 | _OperationRecorder[2].SavePath | |
| Operation recording 3 save completion code | CM6600 | CM6620 | _OperationRecorder[3].SaveFinCode | |
| Operation recording 3 save counter | CM6602 | CM6622 | _OperationRecorder[3].SaveCounter | |
| Operation recording 3 save progress detail 1 | CM6604 | CM6624 | _OperationRecorder[3].SaveProgressInfo3 | |
| Operation recording 3 save progress detail 2 | CM6605 | CM6625 | _OperationRecorder[3].SaveProgressInfo3 | |
| Operation recording 3 save progress | CM6606 | CM6626 | _OperationRecorder[3].SaveProgress | |
| Operation recording 3 save path | CM6610-CM6771 | CM6630 | _OperationRecorder[3].SavePath | |
Source
Transcribed from each model's user's manual, with reference to the "CR/CM conversion difference table" CR_CM_SystemVariableConvertTableInChangeModel.xlsx in KEYENCE's manual replacement material for the KV series.
Related pages
PLC
Device Comparison by Manufacturer
Compares the device addresses of major PLC manufacturers such as Mitsubishi, OMRON and KEYENCE.
PLC
Special Relay Comparison by Manufacturer
Compares the special relays of major PLC manufacturers such as Mitsubishi, OMRON and KEYENCE.
PLC
Application Instruction Comparison by Manufacturer
Compares the application instructions of major PLC manufacturers such as Mitsubishi, OMRON and KEYENCE.
PLC
FUN/FB Comparison by Manufacturer
Compares the functions and function blocks of OMRON NX and KEYENCE KV-X.
PLC
System Variable Comparison by Manufacturer
Compares the system variables of OMRON NX and KEYENCE KV-X.
PLC
Motion Control Instruction Comparison by Manufacturer
Compares the motion control instructions of OMRON NX and KEYENCE KV-X.
MITSUBISHI
SM / SD List
Special relays (SM) and special registers (SD) for Q series / L series / iQ-R series PLCs
KEYENCE
CR/CM Comparison by Model
CR/CM comparison across KV-X, KV-8000, KV-7000, KV-5000 and KV-3000
OMRON
CJ to NJ Instruction Replacement Guide
A guide to replacing CJ instructions with NJ instructions
PC Tools
KVtoCJ
An application that converts KEYENCE KV series ladder programs into OMRON CJ series ladder programs
PC Tools
CJtoKV
An application that converts OMRON CJ series ladder programs into KEYENCE KV series ladder programs